24 Port E2000 Fiber Optic Termination Tools Polishing Jig Plate
24 Port Fiber Optic Polishing Fixture Polishing Jig Polishing Plate
Description of Fiber Optic Polishing Fixture
Fiber Optic Polishing Fixture (or called polishing jig or polishing
plate) supplied by ANC International Co., Limited is used in four corners polishing machine, to polish E2000/APC,
SC, SC/APC, LC/PC, LC/APC, FC/PC, FC/APC, ST/PC etc connectors.
These connectors are locked onto the polishing fixture with a
plastic latch or clamp, which may wear over time and is easily
changeable. The fiber optic polishing fixture is made of high
quality steel with heated treat, the hardened steel provide long
service life. The quality of the polishing fixtures is very
important to ensure the high quality of finished patch cord. Dainly
clean and maintainance is very important to ensure the good quality
and long life-time of fiber optic polishing fixture.
Follow below steps to clean and maintain your polishing fixtures
1. It’s better to clean every day for 5 minutes rather than clean
once a week for 30 minutes. Cleaning the fixtures should be a
regular task – and a priority – in your polishing process.
2. Use distilled water, because it doesn’t contain abrasive
minerals. Do not use tap water – regular drinking water is
different all over the world. Your company’s tap water may contain
iron minerals that tend to adhere to the polishing fixture. Also,
do not use alcohol.
3. The ferrule holes (and for MT style fixtures the ferrule slots,
surrounding surfaces, and top clamps) can be cleaned using dental
brushes and particle‐free, distilled or deionized water. Again, do
not use alcohol. We recommend using a 1.25mm nylon brush
(purple-handled brush) for fixtures with 1.25mm diameter ferrule
holes. Use a 2.5mm nylon brush (blue-handled brush) for fixtures
with 2.5mm diameter ferrule holes. Either one will work fine for MT
style fixtures.
4. Clean the fixture while it’s still wet from the polishing
process. This makes it easy to remove the polishing debris.
5. After cleaning the polishing fixture, dry it thoroughly to avoid
rusting.
Features of Fiber Optic Polishing Fixture
The fiber optic polishing fixture is used in four corners polishing
machine.
The fiber optic polishing fixture adopt independent pressurized
way, eliminate ferrules show the different length effects on
polishing
High efficiency: each fiber optic polishing fixture can hold 24 or
36 or customized connectors at one time
The latch or adapter of fiber optic polishing fixture can be
interchanged, this extend fiber polishing fixture's life.
Different fiber optic polishing fixture is optional for different
connector polishing, such as FC/UPC, SC/UPC, ST/UPC, LC/UPC,
MU/UPC, FC/APC, SC/APC, LC/APC, MPO, MT-RJ, E2000, etc.
Excellent connector end-face polishing quality.
Related Material with Fiber Optic Polishing Fixture
Polishing Pad
1um, 3um, 9um Polishing film, ADS
Specification
| Model | MLS-2000 |
| Polishing Connector Type | FC/UPC, SC/UPC, ST/UPC, LC/UPC, MU/UPC, FC/APC, SC/APC, MTRJ, E2000
or customized |
| Dimension | |
| Weight | 1.2kg |
| Polishing Capacity | 18pcs/20pcs/24pcs/40pcs Connectors or customized |
Related Product Pictures of Fiber Optic Polishing Fixture
