SC Field Assembly Fiber Optic Connectors for 0.9mm 3mm and drop
cable
Description
SC Field Assembly Fiber Optic Connector for 0.9mm 3mm and drop
cable manufactured by ANC International Co., Limited is an
innovative field installable optical fibre connector designed for
simple and fast field termination of single fibers. Field assembly
connectors enable fast and on-site installation of 250µm, 900µm,
3.0mm and 1.6mm x 2.0mm, 2.0mm x 3.0mm cable type connectors even
when the user has no access to power.
These fiber optic SC field assembly connectors offer terminations
without any hassles and require no epoxy, no polishing, no
splicing, no heating and can achieve similar excellent transmission
parameters as standard polishing and splicing technology. The whole
installation process only takes about 2 minutes which greatly
improves the working efficiency. The pre-polished connectors are
mainly applied to FTTH cable in FTTH projects, directly in the end
user site.
Our Field Assembly Optical Connector series are now available in
SC, LC, or FC variants, catering for 250um to 900um, and 2.0mm,
3.0mm diameter single mode and multimode fiber types, including
Multi-mode 62.5/125um and Multi-mode 50/125um. The single-mode
versions are available with UPC or APC ferrules.
Please kindly note that 0.9mm, 2.0mm and 3.0mm diameter are for the
same usage. If 2.0mm or 3.0mm are needed, just remove the tail
handle from 0.9mm fast connector.
Features:
Low insertion loss and high return loss
High reliability, and save maintenance cost.
Pre-embedded fiber is polished in high quality.
Can be reusable with easy disassembly and assembly.
No special assembling tool, assembled without furthering polishing
process;
Compatible with standard SC connector
Low technical requirements for the operators.
PC, APC polishing optional
Used for FTTH Cable or indoor fiber optic cable
Specifications:
| ITEM | Technical Parameters |
| Applicable for | Drop cable. Indoor cable |
| Optical fiber diameter | 125μm ( 657A & 657B ) |
| Tight buffer diameter | 250μm |
| Fiber mode | Single mode |
| Operation time | About 100s(no fiber cut) |
| Insert loss | ≤ 0.3dB(1310nm & 1550nm) |
| Return loss | ≤ -50dB(APC); ≤ -40dB(PC); |
| Fastening strength of naked fiber | >5 N |
| Fastening strength of naked fiber holder | >10 N |
| Tensile strength | >50 N |
| Using temperature | -40～+75℃ |
| On-line tensile strength (20 N) | △ IL ≤ 0.5dB △ RL ≤ 5dB |
| Mechanical durability (500 times) | △ IL ≤ 0.5dB △ RL ≤ 5dB |
Drop-off test (drop-off height 4m, once per direction, totally 3 times) | △ IL ≤ 0.5dB △ RL ≤ 5dB |
User Manuel
Product Pictures
