Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg in
Various Length
Description
Pre-terminated FTTH Drop Cable with Paper Spool and Pull Leg
manufactured by ANC International Co., Limited has customized SC,
SC/APC, LC/PC, FC/PC etc connectors on both ends. The length of the
FTTH drop cable is 20m, 25m, 30m, 50m, 70m, 100m or other
customized length. This FTTH drop cable has pull leg on the open
end of the cable, thus cable can easily be pull out during
installation without damage of connector or cable. Fibre to the
home (FTTH) is the installation and use of optical fibre to provide
high-speed broadband access to individual buildings such as
businesses or single-family units (SFUs) which are freestanding
residential buildings, or multidwelling units (MDUs) such as
apartment buildings. Before deploying a FTTH network, providers
must first decide whether to use a splice, which is a permanent
joint, or a connector, which can be easily mated and un-mated by
hand. This is for both ends of the drop cable – the distribution
point and at the home’s optical network terminal (ONT) or network
interface device (NID). Both splices and connectors are widely used
at the distribution point. At the ONT/NID, either a field
terminated connector or a spliced-on factory-terminated connector
can be used.
The FTTH drop cable has two parallel Fiber Reinforce Plastic (FRP)
strength members placed at the two sides and the 250um bare optical
fibers are positioned in the center. This drop patch cord can be
easily stripped and spliced, it can be simple installed and
maintained. The cable is jacketed with black or white color LSZH
sheath.
FTTH drop patch cord can be directly connected to the homes. It is
suitable for connecting with communication equipment, and used as
access building cable in premises distribution system.
Specification
Two parallel FRP strength members ensure good performance of
anti-electromagnetic and crush resistance
Small Size (mm): 3.0*2.0 (1-2cores indoor) for indoor; 5.0x 2.0mm
for outdoor ;
Bending loss (Bare Fiber) Radius: 7.5mm x 1 turn dB ≤0.5 at 1550nm
Novel flute design, easily strip and splice, simple installation
and maintenance
Low smoke, zero halogen or flame retardant sheath
Low cost;
High return loss;
Low insertion loss;
Usage
FTTH access network.
Telecommunication Networks
CATV Networks
Data communications Networks
Local Area Networks
Technical Data
Construction of Optical Fiber Cable
| Items | Description |
| No. of fiber | simplex or duplex |
| Fiber model no. | Single mode: G.657A |
| Fiber colour | blue/orange |
| Outer diameter of colour coating | 250±15um |
| Dielectric strength member | FRP |
| Jacket | LSZH |
| Colour of Jacket | White or black |
| No. of fibers | Approx. Cable outer diameter | Approx. weight of cable Kg/KM | Minimum bending radius MM |
| No Load | Under Load |
| 1~2 | 3.1x2.0mm | 10.0 | 10 | 20 |
Parameter for single mode pre-terminated FTTH drop patch cord
| Characteristics | Unit | Value/Performance |
| Insertion Loss (IL) | dB | ≤0.2 (typical); ≤0.3 (maximum) |
| Return Loss (RL) | dB | UPC≥50/APC≥60 typical |
| Operating Wavelength | nm | 1310 & 1550 |
| Mating | | ≥500 times |
| Tensile | N | 100 |
| RoHS Compliant | | Yes |
| Operating Temperature | ℃ | -20~+80
|
Indoor Drop Cable Structure
Outdoor Drop Cable Structure
Related Picture
